General Information

Serial #

N/A

Part Number

1

Total Parts

1

AKA

N/A

Patents

N/A

General Description

Metal casing/ Synthetic and metal working parts

Dimensions

Note: These reflect the general size for storage and are not necessarily representative of the object's true dimensions.

Length

80.0 cm

Width

59.2 cm

Height

165.0 cm

Thickness

N/A

Weight

N/A

Diameter

N/A

Volume

N/A

Lexicon

Group

Aviation

Category

Airport operations

Sub-Category

N/A

Manufacturer

AKA

Goodwood

Country

Canada

State/Province

Ontario

City

Carleton Place

Context

Country

Canada

State/Province

Newfoundland and Labrador

Period

circa 1982-2003

Canada

A component of a Canadian designed and at least partly Canadian manufactured computerized data acquisition and display unit for air traffic control. The Electronic System Master Plan for Mirabel Airport identified a need to consolidate the display of information required by air traffic controllers. A system was needed that could collect this information and present it on a television type display. The prototype and software (16-bit) was developed in house at NAVCAN in 1972. An engineering model was developed by the Computer Systems Group, Telecommunications and Electronics Branch of Transport Canada. This model system was built around a mini-computer and incorporated only two display channels. The major concern at the time was the quality of the display, as it had to serve both low and high ambient light conditions. The initial phase of the program had been so successful that the decision was taken to expand the procurement to supply each of the Area Control Centres in Canada, as well as Mirabel, with a system. A contract was written with I.P. Sharpe Associates of Toronto & Ottawa (and Carleton Place) being the successful bidder. Halfway through the contract the project was spun off to a new company, Goodwood Data Systems (basically the Carleton Place facility). The systems were delivered in 1975-1978 (to 7 control centres and 2 systems for the Technical Systems Centre (TSC) in Ottawa and one for the training centre in Cornwall). The contract was for apx. $1 million. The system was based on 7400 type discrete integrated circuits. The Display Site Equipment contract went to Raytheon and Raytheon Canada in Waterloo while the computers were made by DY-4 here in Ottawa. OIDS was subsequently installed at all major Canadian airports with troubleshooting and technical support backup provided by 2 systems in NAVCANs Ottawa Technical Systems Centre near the airport. Training was done in Cornwall both for techs and air traffic controllers on the third backup system (Continued in Notes).

Function

The part of an electronic data acquisition and display system used in an airport for air traffic control which acquired data about such phenomena as wind speed and direction.

Technical

The OIDS replaced analogue and hand input data used by air traffic controllers. OIDS brought together information from different sources in a convenient and constantly and automated updated fashion. It made air travel safer and more efficient because the delays caused by weather in particular were minimized. Weather data handling was improved to the point where updating a weather report was at least 4 times faster than previously. OIDS organized information into "pages" according to type of information or control position requirements. Different data would be selected by the air traffic controller only as needed. The numerous dials, readouts, teletype printouts, and overhead projections could all be removed, leaving a single, uncluttered source of information. The original OIDS, Phase 1A, provided the user with a maximum of 17 pages of data. OIDS Phase 1B provided 297 pages of data (429 pages with software version 900 (1982 upgrade)) plus the capability to make database changes on-site, such as: make changes to page formats, OIDS-ICCS cross-reference tables; weather assignments and deletions; create and delete updatable commands; position and remove updatable commands; and position and remove titles and delimiters. The heart of the OID System was a pair of Interdata Model 70 mini-computers. One computer was designated as MASTER, and the other as STANDBY. Each contained a fully configured, 128K-byte core memory, with a one-megabyte solid-state disk and necessary interfaces for interconnection with other parts of the system. Each computer had a teletypewriter and a dual-drive floppy disk unit as peripherals. Each computer had a front panel control console which was used by the system operator to view system and peripheral status, to load and startup the system. Each solid-state disk had an external write protect switch and status indicators used by the operator to protect the disk and monitor errors. The OIDS worked with the Radar Processing System and Display Centre System which from c1978-c1983 was a system called JETS. JETS replaced an analogue system. Ca. 1984-89 JETS was replaced with a system called RAMP and from ca. 2000 with a system called RSIT which is part of the CATS programme. These were installed in the Area Control Centres and in towers.

Area Notes

Unknown

Details

Markings

Black label on fronts of data acquisition units read 'GOODWOOD/ DATA SYSTEMS LTD'; black lettering on fronts reads 'DATA ACQUISITION UNIT/ DAU-1'; stamped lettering reads 'DAU-1' on one unit and 'DAU-2' on other/ Interior labels on data acquisition unit casing backs read 'GOODWOOD/ DATA SYSTEMS LTD./ DATA ACQUISITION/ CARLETON PLACE ONTARIO CANADA/ MODEL DAU-1 PART NO 10960 SERIAL 0025/ VOLTS 115 AMPS 2 CYCLES 60' and 'GOODWOOD/ DATA SYSTEMS LTD./ DATA ACQUISITION/ CARLETON PLACE ONTARIO CANADA/ MODEL DAU-1 PART NO 10960 SERIAL 0024/ VOLTS 115 AMPS 2 CYCLES 60'/ Interior labels on controller casing backs read 'GOODWOOD/ DATA SYSTEMS LTD./ CONTROL UNIT/ CARLETON PLACE ONTARIO CANADA/ MODEL 300B PART NO 10811-1 SERIAL 0060/ VOLTS 115 AMPS 5 CYCLES 60' and 'GOODWOOD/ DATA SYSTEMS LTD./ CONTROL UNIT/ CARLETON PLACE ONTARIO CANADA/ MODEL 300D PART NO 10811-1 SERIAL 0065/ VOLTS 115 AMPS 5 CYCLES 60'

Missing

One casing side panel.

Finish

Textured turquoise painted casing/ Light grey painted data acquisition unit casing fronts with multicoloured synthetic controls and lights; brushed metal handles, textured blue painted casings/ Glossy blue painted control unit casing fronts with colourless transparent windows and plated parts; textured blue painted casings/ Multicoloured synthetic controls and parts/ Metallic controls and parts/ Multicoloured cables and cords/ Black filters

Decoration

N/A