Renseignements généraux

Nº de série

C90315-0064

Nº de partie

1

Nombre total de parties

4

Ou

S/O

Brevets

S/O

Description générale

Brushed silver metal camera body frame, front panel, lens and microphone housings, trim, and plug. Off-white enamel finish on upper-half of metal camera body casing; flat black enamel finish on lower half of camera body casing. Black synthetic covering on connecting cable; black synthetic eyeshield over viewer.Clear glass lens. Black mesh cover on microphone head.

Dimensions

Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.

Longueur

27,0 cm

Largeur

6,5 cm

Hauteur

14,0 cm

Épaisseur

S/O

Poids

S/O

Diamètre

S/O

Volume

S/O

Lexique

Groupe

Photographie

Catégorie

Cameras ciné

Sous-catégorie

S/O

Fabricant

Ou

Akai

Pays

Japon

État/province

Inconnu

Ville

Inconnu

Contexte

Pays

Canada

État/province

Québec

Période

This camera used 1971-1980

Canada

Example of a consumer video camera designed for use with an Akai VT-100 videotape recorder. Used by the donor's husband to record family gatherings and public events.

Fonction

Converts light reflected by a scene into an analogue electrical signal.

Technique

Example of a lightweight, handheld video camera built around a single 2/3 inch separate mesh vidicon camera tube capable of more than 400 lines horizontal resolution. The inexpensive vidicon tube, originally designed for closed-circuit television cameras, was the most common tube in consumer video cameras until the mid- 1980s. It offered very good definition and minimal interference but was prone to streaking in panning shots and its sensitivity was insufficient for low light situations. (Ref. 1) This B&W camera features a 1.18 10~40 mm zoom lens, through-the-lens optical viewfinder & built-in microphone.

Notes sur la région

Inconnu

Détails

Marques

"AKAI" appears in raised print on rectangular plates fixed to both sides of casing; "AKAI" printed on front casing panel, to right of microphone mounting. "PORTABLE CAMERA/ VC-110/ NO. C90315-0064/ MADE IN JAPAN" appears on rear casing panel. "MADE IN JAPAN" printed at regular intervals along length of connecting cable. "AKAI ZOOM 1:1.8/10~40mm NO. 34506" printed on lens housing. Lens settings also marked on housing.

Manque

Appears complete.

Fini

Brushed silver metal camera body frame, front panel, lens and microphone housings, trim, and plug. Off-white enamel finish on upper-half of camera body casing; flat black enamel finish on lower half of camera body casing. Black synthetic covering on connecting cable; black synthetic eyeshield over viewer.Clear glass lens. Black mesh cover on microphone head.

Décoration

S/O