Renseignements généraux

Nº de série

380079

Nº de partie

13

Nombre total de parties

26

Ou

S/O

Brevets

S/O

Description générale

wood, metal & synthetic components.

Dimensions

Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.

Longueur

42,5 cm

Largeur

28,7 cm

Hauteur

46,3 cm

Épaisseur

S/O

Poids

S/O

Diamètre

S/O

Volume

S/O

Lexique

Groupe

Communications

Catégorie

Télévision

Sous-catégorie

S/O

Fabricant

Ou

Tannoy

Pays

Canada

État/province

Ontario

Ville

Kitchener

Contexte

Pays

Inconnu

État/province

Inconnu

Période

Inconnu

Canada

Inconnu

Fonction

To reproduce bass frequencies not well reproduced by small speakers.

Technique

Most loudspeakers, particularly the smaller ones, are not capiable of reproducing the lower bass frequencies [typically c. 20Hz to c. 200 Hz). Using a subwoofer allows the speakers to ound better at higher volume levels. Also, because a subwoofer can be located anywhere in the listening area, users have more flexibility in positioning the main speakers. (Ref. 8) Specifications: a) loudspeaker section: Frequency Response: -3 dB 31 Hz- 150 Hz (-10 dB @ 21 Hz); Base unit diameter: 10"- 254 mm; Low Frequency cutoff: -3 dB @ 31 Hz, 6ht order tuning vented box (36 dB/ Octave below 31 Hz); Maximum SPL: 110 dB peak SPL @ 1 meter at limiter threshold; System dimensions: H 17.5" - 445 mm x W 11 5/6" - 287 mm D x 16.5" - 419 mm. System weight: 33 lbs- 14 kg. b) Amplifier section: Input Connectors: PS110B: L/R XLR balanced inputs, 10kOhm PS110: L/R RCA, speaker level option Input Level: continuously variable input gain control Low Pass Filter: continuously variable 40 Hz - 15- Hz, 24 dB/ Octave. All Pass: 31 Hz - 300 Hz +3 dB. High Pass Filter: Fixed at 80 Hz, 12 dB/ Octave. High Pass Output: PS110B: L/R, unity gain XLR balanced. PS110: L/R RCA, speaker level option. High Pass output Bandwidth: 80 Hz - 150 kHz - 3 dB. Amplifier type: Mosfet outputs. Power rating: 110 Watts RMS. Protection: Limiter threshold at onset of clipping. Power indicator: Front mounted green LED in active mode, "when signal is present or on initial power up". Green LED turns to red if signal is not present for more than two minutes indicating stand-by mode. The sub turns "auto on" when signal is re-introduced. AC Power Requirement: 110/120 VAC 50/60 Hz or 220/240 VAC 50/60 Hz. Power consumption: 16 Watts at idle 150 Watts at rated power. (Ref. 7)

Notes sur la région

Inconnu

Détails

Marques

"TANNOY" printed on oval synthetic plate fixed to lower centre front of speaker. All controls, connections, etc. labelled. Markings on speaker back include " ANSI/UL- 1482/ LR106478/ [CSA logo]/ NRTL/C/ TANNOY ®/ PS 110/ ACTIVE SUB-WOOFER/ CAUTION/ For continued protection/ against risk of fire, replace only/ with same type fuse and wiring./ ATTENTION!/ FUSE/ 1.25 AMPS/250 VOLTS/ 120VAC- 60HZ" and "[symbol] CAUTION! [symbol]/ RISK OF ELECTRIC SHOCK,/ DO NOT OPEN./ [symbol] ATTENTION [symbol]/ RISQUE DE CHOC ELECTRIQUE/ NE PAS OUVRIR/ 380079". "E156136 (UL) NISPT-2 VW-1 105 [degree symbol] C 18/2C LL110486 CSA NON-INTEGRAL SPT-2 FT2 105 [degree symbol] C 18/2C ---------- TONGYUAN" printed at regular, repeating intervals along length of cord. " [CSA logo]/ SUN FAIR/ AP-41/ E162652" cast in raised print on plug head, between prongs.

Manque

Appears complete.

Fini

Wood frame; black vinyl imitation dark oak wood finish; metal & synthetic fittings; synthetic fabric grill.

Décoration

S/O