Renseignements généraux

Nº de série

S/O

Nº de partie

1

Nombre total de parties

1

Ou

S/O

Brevets

S/O

Description générale

It is metal wires coiled together with metal rings at each end holding the wire ropes in place.

Dimensions

Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.

Longueur

15,4 cm

Largeur

4,5 cm

Hauteur

S/O

Épaisseur

S/O

Poids

S/O

Diamètre

15,0 cm

Volume

S/O

Lexique

Groupe

Mines et métallurgie

Catégorie

Extraction minière

Sous-catégorie

S/O

Fabricant

Ou

Inconnu

Pays

Inconnu

État/province

Inconnu

Ville

Inconnu

Contexte

Pays

Canada

État/province

Inconnu

Période

Inconnu

Canada

This wire rope sample was given to Mr. John Udd as a reference sample for a publication about hoist technologies used in Canadian mines. Mr. John Udd is a mining engineer, starting his career at the Hardy Mine (owned by Falconbridge Nickel) in Levack, Ont. Recently retired (2009) as the Principal Scientist-Mining with Natural Resources Canada’s Minerals and Metals Sector, Mr. Udd has worked at McGill University Faculty of Mining Engineering, Falconbridge Nickel Mines, and was the Director of the Mining and Research Laboratories of the federal government from 1984 – 1996.

Fonction

This style of wire rope is used in mining applications, specifically for friction (Koepe) hoists.

Technique

The Friction (Koepe) hoist, invented in 1877 by Fredrick Koepe, works by passing a wire rope over a drive wheel where the tension differential of the rope at the top of the wheel to the bottom of the wheel is used as a friction break to prevent hoist slippage. ² Unlike drum hoists which store their wire rope on drums as the hoist ascends from the mine, the wire rope used in a friction hoist system is used as a tail rope counter-balance and does not need to be “stored” at the head of the shaft. The 1973 SME Mining Engineering Handbook calls the hoist rope “the single most important component of the mechanical [hoist] system” and that the “correct selection of hoist rope is imperative”. The full locked coil is recommended for all friction hoists and drum hoists at depths of over 3,200 ft because they don’t have a “twist”. The “twist” in a strand rope tends to “untwist” when put under a load compromising the strength of the rope, because the locked coil rope has no initial “twist” the application of a load does not compromise its strength. ³ ² Harmon, James H., ”Hoists and Hoisting Systems”, in SME Mining Engineering Handbook, Ivan A. Given eds. Port City Press: Baltimore, USA, 1973, p. 15-7. ³ Ibid. p 15-23.

Notes sur la région

Inconnu

Détails

Marques

None

Manque

Nothing missing.

Fini

It is metal wires coiled together with metal rings at each end holding the wire ropes in place.

Décoration

None.