Clip, cable

Utiliser cette image

Puis-je réutiliser cette image sans autorisation? Oui

Les images sur le portail de la collection d’Ingenium ont la licence Creative Commons suivante :

Copyright Ingenium / CC BY-NC-ND (Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)

ATTRIBUER CETTE IMAGE

Ingenium, 2013.0097.019
Permalien:

Ingenium diffuse cette image sous le cadre de licence Creative Commons et encourage son téléchargement et sa réutilisation à des fins non commerciales. Veuillez mentionner Ingenium et citer le numéro de l’artefact.

TÉLÉCHARGER L’IMAGE

ACHETER CETTE IMAGE

Cette image peut être utilisée gratuitement pour des fins non commerciales.

Pour un usage commercial, veuillez consulter nos frais de reproduction et communiquer avec nous pour acheter l’image.

TYPE D’OBJET
S/O
DATE
2012
NUMÉRO DE L’ARTEFACT
2013.0097.019
FABRICANT
Inconnu
MODÈLE
Inconnu
EMPLACEMENT
Inconnu

Plus d’information


Renseignements généraux

Nº de série
S/O
Nº de partie
19
Nombre total de parties
22
Ou
cable retainer clip
Brevets
S/O
Description générale
synthetic

Dimensions

Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.

Longueur
2,4 cm
Largeur
1,7 cm
Hauteur
1,7 cm
Épaisseur
S/O
Poids
S/O
Diamètre
S/O
Volume
S/O

Lexique

Groupe
Technologie informatique
Catégorie
Périphériques numériques
Sous-catégorie
S/O

Fabricant

Ou
Inconnu
Pays
Inconnu
État/province
Inconnu
Ville
Inconnu

Contexte

Pays
Canada
État/province
Ontario
Période
Purchased new by the museum.
Canada
Three dimensional (3D) printers are increasingly used for rapid prototyping and short production runs.
Fonction
Inconnu
Technique
Three dimensional printers make objects through additive processes, whereby successive layers of material are laid down to produce the desired shape. This distinguishes them from devices that employ subtractive processes, where material is removed to essentially sculpt the finished product. In conventional manufacturing, subtractive processes are commonly associated with machine tools, many of which operate automatically from physical templates or digital instructions. Digitally controlled additive manufacturing may be said to have originated with the Jacquard loom, in which punched cards control the arrangement of threads into the final pattern. Moulding machines are a common example of an additive device that uses an analogue model (the pattern and mould) to control the fabrication process. In 3D printing the model is a digital “blueprint” produced using computer aided design (CAD) or animation modelling software. Three dimensional printers were first developed in the late 1970s. A number of techniques have been employed, including extrusion deposition, granular materials binding (laser sintering) and photopolymerization (stereolithography). Before the turn of the century, devices were large, expensive and lacking in versatility. Their use was largely confined to industry. In 1995 MIT graduate students Jim Bredt and Tim Anderson modified an inkjet printer to extrude a binding solution onto a bed of polymer powder, coining the term “3D printing” and winning a patent on their design. In 2005-2006 two open-source projects associated with universities were established that stimulated the spread of low-cost 3D printing into the do-it-yourself, or “maker,” market. Established at Cornell University, Fab@Home released its first device, using a multi-syringe deposition system, in 2006. The RepRap Project, founded by Adrian Bowyer at the University of Bath in 2005, aimed to produce a device that could “print” most of its own components. One of the individuals involved with the RepRap project was Sebastien Bailard, a physicist living in Ottawa. To date, no further information has been found about him. Another Canadian connected to RepRap was Wade Bortz, who in November 2008 was the first person outside the Bath lab to replicate all the printable parts of a RepRap machine. RepRap printers generally employed thermoplastic extruders mounted on a computer-controlled Cartesian XYZ platform. This is the same technology used in the MakerBot Replicator. The Replicator is fed by spools of ABS or PLA (bio-plastic) having a filament diameter of 1.75 mm. It can be configured for one or two nozzles (which allows two-colour printing) and builds up objects in layers of .2-.3 mm at a speed of 40 mm/second. The maximum nozzle temperature is 230 C. The device is controlled through proprietary software, a video game-style control bad and an 80 character LCD screen. It can print from files input from an SD card or USB device. The MakerBot has a print volume of 5 litres, producing objects up to the size of a loaf of bread.
Notes sur la région
Inconnu

Détails

Marques
none
Manque
S/O
Fini
Black synthetic. One end has a screw part and the other end would fold over the cable it is meant to secure.
Décoration
S/O

FAIRE RÉFÉRENCE À CET OBJET

Si vous souhaitez publier de l’information sur cet objet de collection, veuillez indiquer ce qui suit :

Fabricant inconnu, Clip, cable, 2012, Numéro de l'artefact 2013.0097, Ingenium - Musées des sciences et de l'innovation du Canada, http://collection.ingeniumcanada.org/fr/id/2013.0097.019/

RÉTROACTION

Envoyer une question ou un commentaire sur cet artefact.

Plus comme ceci


...
Câble

2013.0097.012

Object

...
Cup model

2013.0098.002

Object

...
Cup model

2013.0098.001

Object

...
Shark model

2013.0099.001

Object

...
Shark model

2013.0099.002

Object

...
Shark model

2013.0099.003

Object

...
Boîte pour fi…

2013.0097.005

Object

...
Boîte pour fi…

2013.0097.007

Object

...
Disk, calibra…

2013.0097.009

Object

...
Clip, cable

2013.0097.020

Object

...
Carte mémoire

2013.0097.010

Object

...
Card, calibra…

2013.0097.022

Object

...
Collection de…

2013.0097.021

Object

...
Graisse

2013.0097.017

Object

...
Graisse

2013.0097.018

Object

...
Bande adhésive

2013.0097.011

Object

...
Clé

2013.0097.013

Object

...
Clé

2013.0097.014

Object

...
Clé

2013.0097.015

Object

...
Clé

2013.0097.016

Object

...
Cordon de blo…

2013.0097.003

Object

...
Grattoir

2013.0097.008

Object

...
Printer, thre…

2013.0097.001

Object

...
Adaptateur de…

2013.0097.002

Object

...
Plaque-couver…

2004.1361.064

Object

...
Pédale de com…

2004.1361.002

Object

...
Plaque-couver…

2004.1361.065

Object

...
Traceur de co…

2004.1361.001

Object

...
Calculatrice

1998.0089.001

Object

...
Calculatrice

1966.0769.001

Object

...
Contrôleur

2000.0016.003

Object

...
Tambour de ba…

2005.0060.002

Object

...
Tambour de ba…

2005.0060.003

Object

...
Tambour de ba…

2005.0060.004

Object

...
Enveloppe

2003.0005.004

Object

...
Câble

2015.0122.004

Object

...
Dérouleur de …

1986.0822.001

Object

...
Support de ca…

2003.0005.002

Object

...
Forme d'image

2004.1361.005

Object

...
Forme d'image

2004.1361.006

Object

...
Pédale de com…

2004.1361.010

Object

...
Synchroniseur

2005.0113.001

Object

...
Caméra

2003.0005.001

Object

...
Rédacteur d'é…

2009.0069.003

Object

...
Imprimante

1995.1004.001

Object

...
Outil de régl…

2004.1361.063

Object

...
Cadre

2004.1361.003

Object

...
Maquette de s…

1966.0278.001

Object

...
Lecture de di…

2005.0060.016

Object

...
Carte

1994.0801.001

Object

...
Scanner numér…

1986.0821.001

Object

...
Cordon de blo…

2015.0122.005

Object

...
Support

2004.1361.008

Object

...
Collection de…

2005.0060.017

Object

...
Télécommande

2004.0304.002

Object

...
Table traçante

2004.1361.007

Object

...
Tournevis

2004.1361.061

Object

...
Outil de nett…

2004.1361.062

Object

...
Rideau

2004.1361.004

Object

...
Logiciel

2003.0005.003

Object

...
Scanner numér…

2005.0060.001

Object

...
Échantillon d…

1978.0636.001

Object

...
Câble

2015.0122.003

Object

...
Holder, drawi…

2004.1361.059

Object

...
Mât

2015.0042.003

Object

...
Lame

2015.0042.004

Object

...
Imprimante

1987.2040.001

Object

...
Ordinateur

1985.0372.001

Object

Aucune image disponible.
Objectif

1998.0295.002

Object

...
Batterie

1997.0389.002

Object

...
Batterie

1997.0389.003

Object

...
Section de la…

2015.0042.002

Object

...
Convertisseur…

2000.0016.001

Object

...
Loupe

2004.1361.060

Object

...
Holder, drawi…

2004.1361.056

Object

...
Holder, drawi…

2004.1361.057

Object

...
Holder, drawi…

2004.1361.058

Object

...
Niveau à lune…

2004.1361.009

Object

...
Imprimante

1992.1239.001

Object

...
Imprimante

1995.0698.001

Object

...
Maquette à ré…

1974.0773.001

Object

...
Instrument po…

1986.0004.001

Object

...
Couverture th…

1992.0040.001

Object

...
Synthétiseur

2005.0106.001

Object

...
Télécommande

2000.0016.002

Object

...
Rule, plottin…

2004.1368.001

Object

...
Calculatrice

1981.0001.001

Object

...
Téléviseur

2004.0301.001

Object

...
Lecteur de mi…

1996.0661.001

Object

...
Carte

1994.0702.001

Object

...
Unité contrôl…

1998.0295.003

Object

...
Turbine à vent

2015.0042.001

Object

...
Appareil-photo

2002.0136.001

Object

...
Composant las…

2005.0060.012

Object

...
Calculatrice

2003.0206.001

Object

...
Ordinateur

2004.1330.001

Object

...
Rule, plottin…

2004.1368.002

Object

...
Rule, plottin…

2004.1368.003

Object

...
Rule, plottin…

2004.1368.004

Object

...
Rule, plottin…

2004.1368.007

Object