Current probe amplifier & digital latch
Utiliser cette image
Puis-je réutiliser cette image sans autorisation? Oui
Les images sur le portail de la collection d’Ingenium ont la licence Creative Commons suivante :
Copyright Ingenium / CC BY-NC-ND (Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
ATTRIBUER CETTE IMAGE
Ingenium,
2009.0210.001
Permalien:
Ingenium diffuse cette image sous le cadre de licence Creative Commons et encourage son téléchargement et sa réutilisation à des fins non commerciales. Veuillez mentionner Ingenium et citer le numéro de l’artefact.
TÉLÉCHARGER L’IMAGEACHETER CETTE IMAGE
Cette image peut être utilisée gratuitement pour des fins non commerciales.
Pour un usage commercial, veuillez consulter nos frais de reproduction et communiquer avec nous pour acheter l’image.
- TYPE D’OBJET
- S/O
- DATE
- 1979
- NUMÉRO DE L’ARTEFACT
- 2009.0210.001
- FABRICANT
- Tektronix Inc.
- MODÈLE
- AM 503/ DL 502
- EMPLACEMENT
- Inconnu
Plus d’information
Renseignements généraux
- Nº de série
- S/O
- Nº de partie
- 1
- Nombre total de parties
- 2
- Ou
- Amplificateur de sonde de courant &
- Brevets
- S/O
- Description générale
- Primarily metal with synthetic knobs and cables.
Dimensions
Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.
- Longueur
- 43,0 cm
- Largeur
- 22,0 cm
- Hauteur
- 15,3 cm
- Épaisseur
- S/O
- Poids
- S/O
- Diamètre
- S/O
- Volume
- S/O
Lexique
- Groupe
- Physique
- Catégorie
- Électronique
- Sous-catégorie
- S/O
Fabricant
- Ou
- Tektronix
- Pays
- Inconnu
- État/province
- Inconnu
- Ville
- Inconnu
Contexte
- Pays
- Canada
- État/province
- Inconnu
- Période
- Inconnu
- Canada
-
Taken from Acquisition proposal: Quoting from the NRCan web site: http://www.geod.nrcan.gc.ca/aboutus/gravity/grvinsts_e.php The Geodetic Survey Division owns and operates two absolute gravity instruments, JILA-2, and the A-10. It also collaborates with the GSC in the operation of a second instrument, FG5-106. The JILA-2 was acquired in November, 1985 and FG5-106 in April 1993. The A-10 instrument was acquired in 2000. The JILA-2 has been upgraded four times since it's acquisition with new computer control, new lasers, GPS clock and ancillary equipment. These upgrades were necessary in order to make it more efficient, field worthy, lighter and easier to use. Instrument modifications and tests are essential for Canada to remain at the leading edge in gravimetry. Because of their high accuracy of a few parts per billion, the instruments are used to establish, strengthen and expand the Canadian Gravity Standardization Net. Large calibration ranges are also established for the purpose of calibrating the complement of relative gravimeters owned by the Gravity and Geodetic Section. Smaller calibration ranges are maintained for industry so that companies can evaluate and compare their instruments against the established standard. Examples are the small calibration ranges between Ottawa and Gananoque and between Orangeville and Collingwood. The absolute gravimeters participate on a regular basis in international campaigns and comparisons in order to maintain the high standards of accuracy required of these instruments. The two most recent comparisons were done at the Bureau International des Poids et Mesures in Sevres, France, in 2001, and at Boulder, Colorado, USA, in 1995. The BIPM comparisons for instance occur every four years. Comparisons at the Canadian Absolute Gravity Site (CAGS) have been carried out every year with some exceptions since 1988 with the National Oceanic and Atmospheric Administration (NOAA) under an MOU. - Fonction
-
Provides a complete current measurement system - Technique
-
These items have all played a role in Canada's position at the leading edge of gravimetry. Obviously the leading edge of 30 years ago is no longer the leading edge so NRCan has upgraded its instruments on a regular basis. - Notes sur la région
-
Inconnu
Détails
- Marques
- Print on left instrument reads: "DL 502 DIGITAL LATCH"/ Orange label with black print reads: "GSC[/] CGC/ 14091"/ White label with black print: "NRCan/ RNCan/ A038698""/ Knob reads: "TEKTRONIX"/ Second instrument reads: "AM 503 CURRENT PROBE AMPLIFIER"/ Orange label with black print reads: "GSC[/] CGC/ 14164"/ Knob reads: "TEKTRONIX"/ Top of mainframe reads: "TEKTRONIX AM503"/ Orange label with black print reads: "GSC[/] CGC/ 14090"/ Black and silver label with red print: "GR63335/ DO NOT REMOVE THIS TAG"/ Back of mainframe has settings for the instruments. White label with orange print reads: "CSA/ Testing Laboratories/ ELECTRONIC/ INSTRUMENTS/ S 26938/ FOR LABORATORY USE/ BY QUALIFIED PERSONNEL"/ Black mfr's print reads: "SERIAL/ B064535/ MOD/ [blank]/ TEKTRONIX [logo]/ TM 503 POWER MODULE/ TEKTRONIX, INC. BEAVERTON, OREGON, U.S.A./ PATENT PENDING/ TEKTRONIX, INC."/
- Manque
- S/O
- Fini
- Both instruments have grey and blue metal panel front with black print. They are primarily metal with synthetic knobs. Both instruments are housed in a mainframe. Mainframe is made of metal and painted turquoise. Synthetic? handle. There are two grey cables attached to first instrument.
- Décoration
- S/O
FAIRE RÉFÉRENCE À CET OBJET
Si vous souhaitez publier de l’information sur cet objet de collection, veuillez indiquer ce qui suit :
Tektronix Inc., Current probe amplifier & digital latch, 1979, Numéro de l'artefact 2009.0210, Ingenium - Musées des sciences et de l'innovation du Canada, http://collection.ingeniumcanada.org/fr/item/2009.0210.001/
RÉTROACTION
Envoyer une question ou un commentaire sur cet artefact.